Put it to the Test

Watch OxiLeaf® Work Magic

10 Magical “Feats” You Can Perform!

Put it to the Test
Three Rules to Remember

Your OxiLeaf™ not only purifies air, but ALL your home surfaces as well. That’s right – your carpets, clothes, towels, shoes, counters, etc.

  1. HAVE FUN! Experiment! Your OxiLeaf™ is portable – move it around! Just be considerate for the other people in the house; it is rare, but occasionally some people initially do not like the smell of the activated oxygen and that’s okay – eventually they will. Once you sanitize and bathe your entire home with nature’s cleaning elements, only a small, undetectable amount of O3 is necessary to maintain the natural level of purity. Put it through the paces and marvel at the magic of nature’s purification at work indoors.
  2. ALWAYS keep the back of the OxiLeaf™ clear to draw air.
  3. ALWAYS be watchful of the electric cord. Keep away from water, excessive heat, and prevent pinching cord.

Many of us live in “sick” homes, where in the pollution build-up inside is worse than outside because of how tightly we seal our homes. Once you make your sick home well, you can place your OxiLeaf™ in a central location and let it maintain the “ounce of prevention”.

1 VENTILATION PURIFICATION

Clear Your Home’s Lungs

Although this step takes the most time, it will be the most beneficial for you. Purifying your heating and cooling ventilation system could alone pay for your purifier. It costs hundreds of dollars to have ductwork chemically treated to prevent infection and breathing disorders. Your OxiLeaf™ will continuously maintain a pure air flow
afterwards

  1. Place your purifier directly in front of and facing the cold air return or intake of ventilation system. (extension cord may be required)
  2. Turn OxiLeaf™ on
  3. Now turn on your heating/cooling system fan for continuous operation.
  4. Allow the setup to run at least 12 hours or until you smell the fresh, activated oxygen coming out the vents farthest away from the central air/fan unit. The longer the better. You can let it run this way all day while you’re away.

2 SANITIZE YOUR MATTRESS

How much is sound, healthy sleep worth?

This step won’t take long and has the potential to give you the best night’s sleep ever! You spend one third of your life here. Your overall quality of sleep may be impacted by the freshness of your mattress. A mattress is so
filthy that is is illegal in some states to resell.

  1. Pull the blankets back to expose the mattress and pillows.
  2. Set OxiLeaf™ on the foot of your bed, pointed toward the headboard. (extension cord may be required)
  3. Turn OxiLeaf™ on
  4. Cover your purifier and whole bed with a light sheet to make a “tent” over everything except the back of the purifier (your purifier must be able to draw air through it to produce activated oxygen properly). This will
    concentrate the activated oxygen deep into your bedding to reduce or oxidize the gross stuff (dust mite excretion) that affects your breathing and thus reduces your ability to get a good night’s sleep.
  5. Close the door to the room and allow the purifier to disinfect for two to four hours or all day while you’re away.

Note: Sleeping with the unit in your bedroom is not necessary once the room is sanitized. You will receive a smaller amount of O3 concentrations with the purifier when it is placed in a main living area after completion of house purification.

3 MOLD BLAST THE BASEMENT

Natural Mold Buster

This step will amaze you as your nasty, mold and mildew-smelling basement becomes transformed into a sweet smelling, pleasant place to spend time.

  1. Place your purifier in the center-most area of the basement about 5-6 feet above the floor or as high as possible.
  2. Turn OxiLeaf™ on. Place additional fan in the room if necessary to circulate the activated oxygen to every corner of the basement if the airflow in the basement is stagnant.
  3. Now turn on your Heating/Cooling system fan for continuous operation.
  4. Allow the setup to run for six to eight hours for mild/moderate problems. Allow it to operate from two to four days if you have a serious problem basement. According to experts, if you can smell the mold or mildew, you
    could be at risk!

Note: For severely infected or damp areas, CONSIDER A SECOND PURIFIER. Also, you may need to run a dehumidifier if the basement environment is really damp. Mold and mildew love dampness.

4 FLUSH YOUR BATHROOM

No More Musty, Moldy Smell

This step can help reduce that nasty mold and mildew, as well as helping you keep those gross infectious, microscopic bacteria and creatures from taking over your bathroom!

  1. Place your purifier in the center most area of the bathroom about five to six feet above the floor.
  2. Turn OxiLeaf™ on.
  3. This procedure should be repeated at least once per month to help maintain a safe and healthy bathroom.

5 SPRING CLEAN THE CLOSET

Oxidize Chemicals from Dry Cleaning or Smelly Clothes

This step can help you reduce or eliminated that stale, old smell from your closets and storage spaces.

  1. Place your OxiLeaf™ in the center of the closet or storage space up as high as you can get it. If what you’re purifying is a small item like a chest or trunk, close the lid within one inch of fully closed. You must allow some
    fresh air in for your purifier to work best.
  2. Turn OxiLeaf™ on.
  3. Make sure the back of the purifier is clear and watch the cord as you close the door.
  4. Allow this setup to run for one to two hours depending on how fully you pack your closet or the size of the storage area. It is okay to run it all day.

Note: For stinky, smelly shoes or a smoke drenched jacket, place the item in front of the purifier for an extra hour or so.

6 HAMMER REMODELING FUMES

Take it to the Source and Purify

This step can help reduce and eliminate those hazardous toxic fumes and dust created in your home during and after you paint, lay carpet, install cabinetry, etc.

  1. Place your purifier in the center-most area of the room about five to six feet above the floor.
  2. Turn OxiLeaf™ on.
  3. Place an additional fan in the room to circulate the activated oxygen to every corner of the room if there is limited airflow.
  4. Allow this setup to run for two to 24 hours, or longer, depending on the smell. Let your nose be the judge.

7 TAME PET ODORS

No More Stinky Carpet Stains

This step can help you reduce or eliminate that obnoxious smell that our loving pets sometimes leave us to deal with. If you need to treat a whole room, follow the steps below.

  1. Place your purifier in front of and facing the problem spot directly on the floor. (extension cord may be required)
  2. Turn OxiLeaf™ on.
  3. Make sure the back of the purifier is clear to allow good airflow.
  4. Allow this setup to run for two to 24 hours or longer depending on the smell. Let your nose be the judge.

Note: To purify a stinky spot on the carpet, cover the purifier and affected area with a light sheet creating a tent. Remember to leave the back of the purifier open.

8 CLEAN UP DRY CLEANING TOXINS

Keep your skin healthy with sanitized clothes

This step can help reduce and eliminate that nasty toxic residue and odor left behind in your clothing by your cleaning solutions or by the dry cleaner.

  1. Remove any plastic or paper wrap and hang the clothing in a closet or bathroom. (extension cord may be required)
  2. Place OxiLeaf™ as high as possible and blowing directly on the clothing (if possible) to be “bathed”.
  3. Turn OxiLeaf™ on.
  4. Make sure the back of the OxiLeaf™ is clear and watch the cord as you close the door. Allow this setup to run for one to two hours depending on the smell. Again, let your nose be the judge.

9 CAR REFRESHING

Keep your car smelling fresh, even detoxify new cars

This step can help you reduce that stale smell your car gets as it ages, as well as help eliminate the hazardous toxic fumes left behind in a new car or from a smoker or a pet passenger. This is another powerful demonstration
of the ability of your purifier. This is a single treatment that will have to be repeated as fumes build up.

  1. Place your purifier on the front seat of your car. (extension cord may be required)
  2. Make sure the back of your purifier is clear so you maintain good airflow through the machine.
  3. Turn your car ignition to the “ on” position and turn your car’s heating/cooling ventilation fan on.
  4. Turn OxiLeaf™ on.
  5. Watch the cord as you close the door or put it through the window.
  6. Allow this setup to run one to two hours or longer depending on the smells. Your nose knows.

10 FRESHEN RV & BOAT

Boats and any other target item

This step will purify your musty seasonal clothing, tenting and camping gear, as well as RVs. Do this step if you want to protect them from the nasty problem smells and potential damage from mold and mildew while your valuables are in storage. A must-do before and after storage of your seasonal gear and camper. Have you ever take the cover off your boat and been blown away by the musty smells? This is great for boats, especially with cuddy cabins!

  1. Place items opened or hung up opened in front of the purifier in a closet or storage unit. Or lay the gear out on the floor tented with a sheet leaving the back of the purifier open for ventilation. (extension cord may be required)
  2. Turn OxiLeaf™ on.
  3. Allow this setup to run for one to two hours.
  4. For RVs, campers, tents and boats place the unit inside and make sure there is a small window or a vent open for ventilation. Leave the purifier inside for two to 24 hours depending on the severity of the mold/smell.

Note: If you are allergic to pollen or mold that finds its way into the RV or camper at night or are an avid camper, consider investing in a second purifier for the road. Wait for the after thunderstorm fresh air smell before removing the unit (or turning it down).